English
Español
中文简体Cleaning Equipment - Nearly 30 years of history.
Home / News / Reasons and solutions for no pressure in high pressure cleaners
The reasons for the insufficient water pressure of the high-pressure cleaner can be roughly divided into the following three types:
1. Motor failure or insufficient power supply;
2. The high-pressure pump is worn or injected with impure oil;
3. The high-pressure gun barrel is damaged or the inner rubber gasket of the gun head is not sealed.
Solution:
1. Check whether the motor starts normally. If impure oil has been injected into the high-pressure pump, the oil in the pump must be drained first, and then the special oil for the high-pressure pump must be injected;
2. Check whether there are kinks, bends or damage on the hose, filter device and nozzle;
3. Check whether the cleaning fluid nozzle is connected to the spray gun, verify that the machine has been running for more than 3 minutes with the spray gun turned off, and check whether there is excessive wear on the nozzle.
High efficiency aluminum pump
Quick connect function
One click to change nozzle
Total stop system: engine only operates when pull the trigger
Build-in thermal protector
Accessory storage
BY02-VBC with handle and cable collect storage, is ideal for your daily use for cleaning dirt, stain, spot. This electric powered high pressure washer can max up to 2000W with water proof IPX5 level, build-in protector, it is good washing machine for basic use and daily cleaning.
