English
Español
中文简体Cleaning Equipment - Nearly 30 years of history.
High-pressure cleaning pumps are widely used in various industries due to their low cleaning cost, no environmental pollution, no damage to the objects to be cleaned and high cleaning efficiency. But we know that no matter how good the mechanical equipment is, it needs to be maintained, so how should the daily maintenance and maintenance of the high pressure cleaner be carried out?
First: When cleaning the hose and filter of the high-pressure cleaning pump, it is recommended to use an appropriate amount of detergent, so that the substances remaining in the high-pressure cleaning pump can be effectively removed, and pure tap water can be used to supply water to the high-pressure cleaning machine. , Strictly prohibit the water containing sand and other impurities. And often flush the scale deposited in the water inlet pipe.
Second: connect one end of the water inlet pipe to the water inlet of the high pressure cleaning pump, put the other end into the bucket, connect the water source and power supply, turn on the trigger of the high pressure spray gun, and enter the working state after the air in the high pressure pump is exhausted.
Third: After each use of the high-pressure cleaning pump, in order to ensure that all the pressure in the hose can be released, you need to pull the trigger on the servo gun lever in time;
Fourth: In order to ensure that the high-pressure cleaning pump has a long service time, every time the high-pressure cleaning pump is used, it is necessary to remove all the hoses installed on the cleaning pump, such as rubber hoses and high-pressure hoses.
Fifth: Check the pump before supplying water to ensure a certain water pressure and flow rate. There is no rust in the water tank. The filter needs to be checked regularly to ensure that there is no blockage and damage. Strictly prevent solid particles from entering the pump and nozzle with the water pipe. meet the requirements.
Sixth: After the cleaning operation is completed, rinse the hose and filter connected to the detergent to remove any detergent residue to prevent corrosion.
