Home / News / High pressure washer does not produce water how to do
High pressure washer does not produce water how to do
In recent years, high-pressure washers in China's civil, commercial and industrial cleaning field is developing rapidly. Especially in the industrial field, high pressure washer this environmentally friendly non-polluting cleaning equipment is occupying 50% of the market share, but the ensuing problems have arisen, the wrong use and maintenance lead to frequent equipment failures. We in the high pressure washer failure, should be based on different failure phenomenon, carefully find the cause of the problem in a timely manner. Here we mainly introduce the high-pressure cleaner does not come out of the water how to do?
High-pressure cleaning machine does not produce water how to do.
1. The inlet pipe resistance is too large, check whether the inlet pipe has a dead end or blockage.
2. The inlet pipe and pump body with air retention.
3. High-pressure cleaner host is too far from the water source resulting in too long inlet pipe, can be installed with a self-priming pump to solve.
4. High pressure pump speed is not enough, check whether the impeller and pump shaft fastening nut is loose, whether the spindle is deformed resulting in insufficient power.
5. The impeller of the high-pressure pump is damaged.
6. The high-pressure pump bottom valve is damaged or the bottom valve filter blocked.
Finally, we use high-pressure cleaner in the daily use of equipment to carry out daily inspection and maintenance, in order not to affect the cleaning work, no matter which situation occurs, we need to deal with in a timely manner to ensure the smooth operation of high-pressure cleaner work.